Sharkbite® SB03353522 2XL Large Diameter Reducing Slip Tee, 1-1/4 x 1-1/4 x 3/4 in Nominal, Push-Fit End Style, Brass, Import

SHARKSLIPTEELI MFG #: SB03353522
  • Country of Origin: CN
  • Dimensions: 6.7 in L
  • Domestic/Import: Import
  • End Style: Push-Fit
  • Fitting/Connector Type: Tee
  • Manufacturer Name: Reliance Worldwide Corporation
  • Material: Brass
  • Nominal Size: 1-1/4 x 1-1/4 x 3/4 in
  • Pressure Rating: 200 psi
  • Series: 2XL
The SharkBite® Reducing Slip Tee allows for the fitting to be connected to the pipe and, using the [disconnect clip], slipped back onto the other end of the pipe without the need for additional pipe or tubing. The center of the tee can then reduce pipe size down to the desired size. This product is rated to 200 deg F and 200 psi and can be easily rotated on the pipe after installation making it much easier to work in tight spaces. This product is certified for use with Copper and CPVC. Reducing Slip Tee allows for the fitting to be connected to the pipe and, using the [DISCONNECT CLIP], slipped back onto the other end of the pipe without the need for additional pipe or tubing. The center of the tee can then reduce pipe size down to the desired size. This product is rated to 200 deg F and 200 psi and can be easily rotated on the pipe after installation making it much easier to work in tight spaces. This product is certified for use with Copper and CPVC.
  • Features and More

Features

  • Quick connect - No tools, soldering, clamps, unions or glue required, cut pipe square, de-burr to remove rough edges/debris, mark the pipe for correct depth and push to get a pressure ready connection every time
  • Quick disconnect - Disconnect in seconds by sliding the de-mount tool down the pipe to engage the demount lugs and rotate clockwise to lock the open position leaving both hands free, you can now remove the pipe
  • SAFE-recessed release collar - Commercial SharkBite® require a special demount tool and cannot be accidentally disconnected/released
  • Extensive range including slip feature on couplings and tee's - When repairing or tapping into existing pipe with push-fittings you must be able to either move the fitting or the pipe to ensures the pipe is engaged fully into the fitting, with rigid pipe like copper the only way with push-fittings is to have a slip feature to allow easy installation when tapping into existing pipe
  • Easy installation unlike the tool intensive connection methods there is no need to send multiple fitters to a job, SharkBite® commercial has been designed to be installed or removed by one person
  • All fittings are lubricated for easy connection and by fitting the de-mount tool before engaging the pipe the force required can be reduced further
  • Wet or dry - No waiting for copper tube to dry before soldering or glue to cure, SharkBite® makes an instant connection in seconds
  • No tools - Unlike alterative tool intensive connections systems, SharkBite® has no special tooling required for installation
  • No time - Fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require fire permit or fire marshal
  • No waste - Should you make an error or simply want to change your installation, no problem for SharkBite®, simply remove and re-use, (fitting used for repeated testing must not be used in any permanent application)
  • Fittings cannot be disassembled - SharkBite® commercial fitting are factory assembled and components cannot be removed
  • Long pipe engagement - Provides pipe support against lateral pipe forces
  • Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953 or NSF372, dezincification properties (DZR) exceed ISO6509 and NSF-14
  • Suitable for underground installation subject to local code authorities/inspector
  • Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for installation
  • Design for use on ASTM B88 hard drawn and annealed copper type K, l or M, ASTM F876 and F877 pex and ASTM D2846/D2846M CPVC water pipe
  • Chloramine resistant EDPM O-ring, copper tube liner, 316 stainless steel grab ring, acetyl copolymer SharkBite® cartridge assembly
  • For use with copper, CPVC and PEX pipe
  • https://youtu.be/mOl-hJkadVM

Application

  • For potable water
  • hydronic heating
  • chilled water
  • general water distribution for irrigation
  • commercial and residential applications

Standards/Approvals/Certifications

  • ASSE 1061/NSF 61
  • cUPC Listed
  • CSA B125.3
  • IAPMO Listed
  • IPC Listed
  • NSF/ANSI 372

Warranty

  • 2 years Limited